Our Top Pick
Makita XPHR 12R LXT


(4.3/5)


$187.49
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.

Introduction

Makita Drills are versatile units designed for DIY and home improvement projects. The company boasts of new battery technology and high speed/torque settings. With an overwhelming number of options in the market, it can be a daunting task to select the right unit for the job. Before you hit the stores to choose the best Makita drill, you may want to follow this comprehensive guide.

Drill Clutch

Makita drills come with an adjustable clutch which is located behind the chuck. It disengages the drive shaft when a certain level of resistance is reached. This gives control so you don’t strip a screw. Depending on the drill size, clutch settings will vary. It’s crucial that you choose a drill with up to 24 clutch settings. This device will allow you to fine-tune the power the drill delivers.

The low setting will be used for drilling holes for smaller screws while the high settings are for large screws. Moreover, the clutch should allow the motor to drive the bit at full power. The more speeds you have, the more technical you can get with your projects.

Brushless Motor

The best Makita drill with a brushless motor is very different from the brushed counterparts. A brushless motor reduces friction and adjusts the amount of power drawn from the battery. For brushed motors, the power runs through two brushes on opposite sides of the motor. These brushes come into contact with the communicator (the part fixed to the shaft). This, in turn, creates a lot of friction which leads to wear and tear. On the upside, brushed motors give the same amount of current at any given time. When drilling in dry walls, the motor detects resistance and tells the circuit board not to supply too much electric current.

Brushless motor, on the other hand, allows the user to adjust the amount of power depending on the task at hand. This explains why the best Makita drill has a brushless motor. According to manufacturers, it’s good that you use brushless motor because it translates to a longer product life. Without a doubt, a unit that uses brushless technology is a smart buy.

Chuck Size

The chuck is the spinnable handle that allows you tighten or loosen the area that holds the bits. Ideally, the size tells the bit the drill can accommodate. Big drills have bigger chucks while small drills have small chucks. The size also determines the capability and power of the unit. To put it succinctly, a powerful drill has larger chucks.

While this gives you the flexibility to perform a range of tasks like drilling wood and concrete holes, you may want to go for a unit that can accommodate large chuck for complex tasks. Recently, Makita introduced 3/8 inch ratcheting keyless chuck. It gives better bit retention leading to higher productivity.

Secondly, it’s less cumbersome to change the bits. Of course, you’ll have no key to lose. Most 18V drills can handle 3/8 inch chuck with ease. They can also accept any bit size, including those designed to handle complicated tasks like drilling into a concrete or bricks. Choose a unit that has a 3/8 inch chuck.

Best Makita Drill Comparison

Makita LCT209
Makita CT226
Top Pick
Makita XPHR 12R LXT
Makita DS4012 Spade
Makita FD02W
Makita LCT209W 12-Volt Max Lithium-Ion Cordless Combo Kit, Black,  2-Piece
Makita CT226 12V Max CXT Lithium-Ion Cordless Combo Kit with 70-Piece Impact Drill-Driver Bit Set
Makita XPH12R 18V LXT Lithium-Ion Compact Brushless Cordless 1/2" Hammer Driver-Drill Kit (2.0Ah),
Makita DS4012 Spade Handle Drill, 1/2-Inch
Makita FD02W 12V max Lithium-Ion Cordless 3/8" Driver-Drill Kit
from $395.10
from $99.00
$187.49
$141.99
from $244.95
-
Makita LCT209
Makita LCT209W 12-Volt Max Lithium-Ion Cordless Combo Kit, Black,  2-Piece
from $395.10
-
Makita CT226
Makita CT226 12V Max CXT Lithium-Ion Cordless Combo Kit with 70-Piece Impact Drill-Driver Bit Set
from $99.00
Top Pick
Makita XPHR 12R LXT
Makita XPH12R 18V LXT Lithium-Ion Compact Brushless Cordless 1/2" Hammer Driver-Drill Kit (2.0Ah),
$187.49
Makita DS4012 Spade
Makita DS4012 Spade Handle Drill, 1/2-Inch
$141.99
Makita FD02W
Makita FD02W 12V max Lithium-Ion Cordless 3/8" Driver-Drill Kit
from $244.95
Last Updated 2019-11-21 CET -
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.

Batteries and Chargers

Because Makita drill is powered by a battery, you need the right battery technology. High voltage means more the drilling power. While there are 12V batteries that do a good job, you should go for 18V batteries if you intend to use the drill for demanding tasks. The manufacturer uses Ah rating (ampere-hour) to determine how long the battery charge will last. Most Makita drills have batteries ranging from 1.3Ah to 3.0 Ah. What’s more, the battery voltage includes 6, 9.6, 12, 14.4, and 18V.

These units come with rechargeable chargers equipped with temperature sensors to protect the batteries. Depending on the battery size, the recharge time ranges from 15 minutes to three hours. While slower recharging is not a concern for most home DIY tasks, you may need a unit that charges faster if you’re working on a contract job. Simply put, the best Makita drill comes with a battery that allows speedy recharge without generating excessive heat. Best of all you can keep one battery charging while working so you’ll never run out of battery power.

To make your drilling work a breeze, you should use 18V 3.0 Ah batteries. This is enough power to bore big holes in flooring and framing lumber. The only downside with a big battery is adding extra weight. An 18V model may weigh up to 10 lbs. And because Makita drills come with new NiMH batteries they can hold more power. You’ll have no problem using your drill and then storing it for months. You may also want to go for batteries with built-in circuits to protect them from overheating and overcharging.

Torque and Power

Torque is the rotational force described in Newton Meters. While most drills run at a single speed of 300rpm or 800rpm, Makita drills have up to 1000rpm. All units are fitted with speed-range switch which allows you to select high and low speed. The high-speed is for drilling while the low range is for driving screws. The reverse and forward switch should be easy to operate with your thumb.

For repair and carpentry tasks, choose a unit with two-speed switch. The variable speed control allows the user to adjust the speed from 0rpm to top range. To complete your tasks with ease, you should look for the range between them. If you’re more into drilling than screwing, choose a unit with 1000rpm or higher. Remember, larger bits require more torque to turn. Choose a unit that is powerful enough to turn such bits.

Hand Grip

The texture and contour will determine the hand drip. Makita drills come with a rubberized grip that gives unmatched comfort when working for long hours. Whether you’re buying your first drill or upgrading to a more powerful option, you may want to try how the grip feels. See whether it can handle the weight of longer jobs. The best Makita drill has a pistol grip that is easy to handle. Also, the T handle appears to the more comfortable and allows you to put more force on the work. Buy a unit that prevents hand slippage while giving an overall balance.

Best Makita Drill Reviews

1. Makita XPHR 12R LXT Review


(4.3/5)


$187.49
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Very compact
  • More torque and speed.
  • Comes with an extra battery

  • More expensive than others
  • May get stuck in the hammer mode
  • Not best for big holes

This lithium-ion cordless hammer driver drill is the best Makita drill for any mason or anyone who works with their hands. It is an excellent hammer for anyone who works with dense materials such as concrete and stone.

It has four motor pole that can deliver almost 530 pounds of torque. It can go up to 2000RPM and 30000BPM when it is set at high speed. This tool helps you to make an adjustment of screws without messing them up.

It is a quick, incredible and efficient drill that comes with a battery charge; it takes just 30 minutes to recharge its battery. It is also built with extreme protection technology which is the XTP which makes your tools resist any challenge thrown at it.

It has BL brushless motor which is electronically controlled so as to optimize battery energy for almost 50%. This motor uses power to match the torque and RPM to the changing demands of its application.

Want to know more about the Makita XPHR 12R LXT ?
Click here to LEARN MORE From Amazon Customers.

2. Makita LCT209 Review


(4.6/5)


from $395.10
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Offers both pro power and pro speed
  • Impact driver and high torque drill
  • Lightweight and compact

  • Improper work
  • Plastic chunk on the drill
  • Low capacity 12V li-Ion Battery

This Makita 12volt max lithium cordless combo kit is a powerful driver drill; it helps you to complete any fastening and drilling efficiently. It can deliver almost 200 inches per pounds of maximum torque when it is appropriately used. It comes in a kit that you will find a high-quality impact driver that has more power than the driver drill.

It also comes with a durable battery which supports the driver drill. The battery is made from lithium ion which is sustainable for a long duration.it also has an ultra-compact two-speed driver drill which weighs 2.2 pounds of torque.

It has a compact design which is great when you are working in a small corner. It is the best Makita drill since it is used both lightweight jobs and heavy weighted. It is shaped ergonomically in such a way it easily fits in your hands, and it is also designed with some shining light that points on the work you are doing.

Want to know more about the Makita LCT209 ?
Click here to LEARN MORE From Amazon Customers.

3. Makita CT226 Review


(4.6/5)


from $99.00
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Comes with a combo kit
  • Easy to move to anywhere
  • Lightweight therefore easy to control

  • May not meet multiple purposes.
  • Slightly bulky
  • A bit underpowered

This best Makita drill delivers pro power and speed and ultra-compact size. It includes cordless solutions for fastening, drilling, and driving; it is also best for users who require more lightweight and compact tool for spaces which are tight.

It includes an ultra-compact, it delivers 970 lbs of max torque, and it also has a two-speed driver drill that weighs 2.8lb. Makita has expanded its 12-volt CXT Lithium-Ion cordless line-up whereby it includes the driver drills and an impact-wrench, circular saw, impact-driver, reciprocal saw, and flashlight. It has a battery that delivers more power in an impact size which gives it more efficiency.

This best Makita drill is easy to control, and its compact size makes it easy to move. It will give you the best results by using less voltage, and it is still lightweight.it is has handles that are designed ergonomically with rubbed soft grips so as to provide increased comfort to the user.

Want to know more about the Makita CT226 ?
Click here to LEARN MORE From Amazon Customers.

4. Makita DS4012 Spade Review


(4.6/5)


$141.99
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Has a well-balanced design
  • Rubberized grip for comfort
  • Ideal for mixing plaster and drywall.

  • Slightly noisy
  • No driver kit
  • Handle can be removed, not permanent

It has which has the different speed for drilling and mixing performance. It D-handle rotates 360 degrees with 24 decent stop. It is durable and has a long life. It has a drill chuck which is engineered for positive retention.

This is a powerful drill, which delivers a lot of features for material.it has a variable speed which provides control when mixing as well as improved performance. Its spade hand is powered by an 8.5 motor which has a reverse switch and 0-600 RPM which gives it optimum performance.

It also has a ball bearing that is engineered for longer life and smooth operation. It also has convenient features which included a comfortable d-handle that can operate 24 stops for multiple operations.

Much more it also has a well-balanced design at 6.2 lbs and its rubberized grip which can increase operator comfort. It has a soft rubber that is made ergonomically. Therefore, it is safe and comfortable without any side effects.

Want to know more about the Makita DS4012 Spade ?
Click here to LEARN MORE From Amazon Customers.

5. Makita FD02W Review


(4.4/5)


from $244.95
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Compact and lightweight
  • Long lasting charger
  • Easy to use

  • Takes much time to charge fully
  • Has features similar to old models
  • Vibrates at high speed

This is also the very best Makita drill which has a compact design. Therefore, it is smaller than the others. Having it in your hand can make you feel like you have a pistol, not a drill.it also has a lightweight which enables you to move it easily. It comes with a battery which takes almost 50 minutes to be recharged. This is an ideal drill for small projects around the house.

It gives the best torque which makes it easier for anyone using it to make holes according to what he wants. It also has torque control features which makes it easier for the user to control the torque. It comes with safety measures and has a lightweight which makes it easy for you to do your tasks.

It comes in a low weight hence it is comfortable to the user, it is also a tow speed model whereby a spider switch that is found on top of the drill selects between the speed ranges.

Want to know more about the Makita FD02W ?
Click here to LEARN MORE From Amazon Customers.

Best Makita Drill Summary

Are you pining for the power of a cordless drill? Well, Makita drill is a tool that every man needs in his kit. It’s designed to perform nearly every type of drilling. These modern units will charge quickly and will stay powered up when called into action. Unlike the corded counterparts that use Lithium-ion batteries, the new NiMH batteries make the units more powerful.

Secondly, you can adjust the torque settings to avoid over-tightening when performing light screwing tasks. Thirdly, the best Makita drill has a switch which allows the user to select the drilling mode. This feature comes in handy when working on wood or concrete materials.

For DIY tasks, you should navigate towards the best Makita drill. You can rely on it for remodeling a kitchen, building a deck, installing fixtures, and other smaller tasks. We recommend that you follow the above guide as a helpful overview before you make your investment decision.

4.3