Our Top Pick
Shop Fox W1851 Table Saw


(3.5/5)


$1,489.99
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.

Introduction

Hybrid table saws are quickly gaining popularity due to the smoothness, power and high performance they provide during cutting. If you’re planning to do a big woodwork project then this is probably the best tool to use, they are equipped with top-range units featuring parts from other types of saws such as cabinet saws but are still far less expensive compared to the high-end cabinet model thus making them more common among buyers. Below are some factors to consider when looking for the best hybrid table saw.

Model and Design

When searching for a simple job site saw, it’s recommended to go for a small and lightweight hybrid version that’s portable and easy to store. Furthermore, such models won’t overstrain your electrical systems plus they can be operated from a workbench or portable stand.

Most hybrid saws are designed to combine aspects of both cabinet and contractor saws, however, the choice of which cabinet-saw features are incorporated into the hybrid may vary from one manufacturer to another. Some models incorporate a cast-iron primary saw table, as well as heavier trunnions and gears, while others have motors that contain no more than 2 horsepower.

Features of the Machine

Always ensure that the product you are choosing has the appropriate features needed to complete your cutting job. One of the most important features to check is the fence-type, it should lock down sturdily and perfectly be aligned with the blade. However, if a good fence isn’t available with your hybrid saw then you might have to purchase one separately and upgrade it.

You also need to check the device’s flatness orientation which should be perfectly level for making accurate cuts, a deviation range of 0.005” is recommended for hybrid table saws. Similarly, ensure that the bevel capability is sufficient for making angled cuts in whichever direction you want. A good hybrid table saw should allow you to tilt the blade left of right depending on your preferences, plus in either case the ability to adjust your blade to the precise angle should be simple and straightforward.

Voltage Requirements

In many regions, hybrid saws are designed to run on a versatile electrical output range of between 110-220 volt power. This is mainly because they combine aspects of both cabinet saws which utilize up to 220-volt power, and contractor saws that use 110-volt power.

The key benefit of such a wide voltage capacity is that your saw’s motor shall be less susceptible to breaking down under a heavy workload. Always ensure that you choose a device with appropriate voltage to handle the job which you will put it through.

Best Hybrid Table Saw Comparison

Shop Fox W1819 3 HP
Powermatic PM1000
Top Pick
Shop Fox W1851 Table Saw
Grizzly G0690
SawStop CNS
Shop Fox W1819 3 HP 10-Inch Table Saw with Riving Knife
Powermatic PM1000 1791000K Table Saw 30-Inch Fence
Shop Fox W1851 Hybrid Cabinet Table Saw with Extension Table
Grizzly Industrial G0690-10" 3HP 220V Cabinet Table Saw with Riving Knife
SawStop CNS175-SFA30 1.75Hp Contractor Saw 30" Aluminum Fence System
from $1,893.11
from $1,979.99
$1,489.99
$2,020.00
$1,849.00
-
Shop Fox W1819 3 HP
Shop Fox W1819 3 HP 10-Inch Table Saw with Riving Knife
from $1,893.11
Powermatic PM1000
Powermatic PM1000 1791000K Table Saw 30-Inch Fence
from $1,979.99
Top Pick
Shop Fox W1851 Table Saw
Shop Fox W1851 Hybrid Cabinet Table Saw with Extension Table
$1,489.99
Grizzly G0690
Grizzly Industrial G0690-10" 3HP 220V Cabinet Table Saw with Riving Knife
$2,020.00
-
SawStop CNS
SawStop CNS175-SFA30 1.75Hp Contractor Saw 30" Aluminum Fence System
$1,849.00
Last Updated 2019-11-21 CET -
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.

Type of Miter Gauge

Basically, there are 2 kinds of miter gauge slots that you can choose from, which include the T-slot and rectangular slot. The first option consists of gauges with a notch on both sides of the glide that easily fit into the spaces, and helps to prevent the miter gauge from getting dislodged from the slot during use. The latter has a total of 3 sides to the gauge slot and can fit perfectly into most T-slots, but T-slots can’t fit into a standard rectangular-style miter gauge.

Nevertheless, T-slots can still accommodate other high-grade table saw accessories like locking feather boards. They are rarely found on contractor’s saws but are available on most cabinet saws. Choosing a suitable hybrid-saw miter gauge style is all a matter of individual preference and convenience.

Additionally, no matter the design you pick always check that the miter gauge of your hybrid saw is sturdy and can easily be adjusted to whichever angle you want, plus the angles should be able to stay firm when the lock is secured into place. Preferably, the miter gauge should slide easily into the available miter slots with no sliding in the mechanism. Any sliding in the track may result to wrong angles when using the device.

Safety Functions Available

Safety is one of the greatest features of a hybrid table saw, particularly considering that this tool is the most hazardous woodworking device available today. One of the safety functions to check is whether the device has a large, paddle-style switch which can be used to switch off the saw using your leg or knee in case of a crisis, while in the meantime keeping your hands stable on the control.

Additionally, ensure that your hybrid saw has a riving knife that fits just behind the saw-blade, and measures just the same width as your saw blade. As the sliced wood pieces slide past the blade, it’s the riving knife that will keep the boards separated and prevent wood debris from knocking onto the blade and thrusting forth into the user. Furthermore, a useful riving knife should be able to be lifted or lowered automatically with the saw blade, and easily detached when using a dado-blade on the device.

Likewise, some hybrid saws feature anti-kickback pawls that prevent wood pieces from the table top bouncing back into your face and causing injury. These pawls also prevent damage to the top-surface of the saw stock.

Best Hybrid Table Saw Reviews

1. Shop Fox W1851 Table Saw Review


(3.5/5)


$1,489.99
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Built in dust collection
  • One-piece cabinet frame
  • Dual position

  • Heavy to move
  • May need floor reinforcement
  • Requires assembly

This model boasts a range of extras that you might not expect in a machine this size and there is certainly a lot more to it than your usual table saws. For a start there are the added safety features and the ease in which table and fence can be adjusted for exactly the right position, without compromising on performance or precision.

Featuring a quick release blade that greatly reduces the risk of accidents, the Shop Fox has the same performance standards as a table far greater in size. With trunnions secured firmly to the cabinet, this model offers good stability and its multi position rip fence means it can be adjusted for high or low cutting jobs quickly and easily. The blade itself can be easily tilted to exactly the right angle, up to 45 degrees, perfect for creating bevels. The extending cabinet also provides plenty of space to work.

While not as big as full-size versions, the Fox Shop W1851 is a perfect tool for hobbyists and professional woodworkers. It offers all the performance of a large machine with the benefit of excellent safety features and innovation. If you’re looking for a quality project for a decent price, this is for you.

Want to know more about the Shop Fox W1851 Table Saw ?
Click here to LEARN MORE From Amazon Customers.

2. Shop Fox W1819 3 HP Review


(4.0/5)


from $1,893.11
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Professional standard machinery
  • Plenty of power
  • Very stable

  • Complicated set up
  • Small power on switch
  • Heavy to move

If you’re looking for a piece of kit that’s going to stay the distance, then the Shop Fox W1819 3 is built to last.

There are many features to this saw that will make you glad to have it in your workshop, including cast iron trunnions, triple belt drive and a 3 HP Lesson Motor. The impressive riving knife carefully follows the blade to give a precise, accurate cut.

This heavy machine also features a miter fence and flip stop, which makes it a great bet for working on longer pieces of work. The flip stop allows the user to make multiple cuts on the same width and can be flipped out of the way.

Adjusting the blade for the right angle is as straightforward as loosening the blade tilt lock and turning the blade handwheel to the desired angle. The blade can be moved from zero to a 45-degree angle.

The Shop Fox weighs in at 539 pounds and has a floor to table height of 34-inches. The extending wings add another seven inches on to the existing width and depth of 27 by 40.25 inches. The dust collection port makes removing dust from the work area a straightforward process.

Want to know more about the Shop Fox W1819 3 HP ?
Click here to LEARN MORE From Amazon Customers.

3. Powermatic PM1000 Review


(3.8/5)


from $1,979.99
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Great safety features
  • Good dust collection
  • Low power need

  • Difficult assembly
  • Low quality blade
  • Very heavy

A heavy-duty power table saw has a range of fresh features which make a good bet for the professional woodworker.

A safety switch in an easily accessible place, gives it good marks in the safety stakes while the quiet motor is a surprising bonus and not necessarily always a given for table saws this size.

Other safety features included in the package are a guard assembly and dust collection system.
The saw itself requires just 115v of power for operation. This means you could, in theory plug it into any room in your house. It features a 1-3/4 HP motor and a poly v belt. It’s this belt that helps reduce wobble and vibration and makes the motor run to full efficiency.

The Powermatic has an efficient dust collection mechanism and is coupled with an impressive 30inch fence for maximum safety and efficiency.

Assembling the guard requires no tools and the side leaves expand to give plenty of space for working.

The miter gauge can pivot to 60 degrees offering a maximum range of cutting angle and is straightforward to alter. This machine comes with a five-year warranty.

Want to know more about the Powermatic PM1000 ?
Click here to LEARN MORE From Amazon Customers.

4. Grizzly G0690 Review


(4.0/5)


$2,020.00
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Excellent saw
  • Minimal dust
  • Good power

  • Heavy
  • Complicated assembly
  • Wings do not match table

Weighing in at 530 pounds, the Grizzly G0690 is not lightweight. It measures 24x30x43inches and features a 3HP motor.

The machine features a triple belt drive and large table and wings. It comes with everything you would expect on a saw of this quality including a T-slot miter gauge and decent size dust collection port.

The precision ground cast iron table and cast iron trunnions give it extra stability, while the 10 inch riving knife also carries with it a quick-release system. Other quick release features include the motor guard and splitter assembly. The riving knife is able to move up and down and tilt with the blade.

The table itself features powder coat paint which makes it very pleasing on the eye but more importantly helps protect it against nicks and scratches. The cabinet-style design helps the whole machine to remain stable and reduce vibrations.

Delivery of this saw does not, in general, include assembly and will need to be set up with access to 220v power.

Included in the pack are nylon runners, standard and dado table inserts.

Want to know more about the Grizzly G0690 ?
Click here to LEARN MORE From Amazon Customers.

5. SawStop CNS Review


(2.8/5)


$1,849.00
(as of 2019-11-21 CET)
Price Disclaimer Product prices and availability are accurate as of 2019-11-21 CET and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
  • Large on/off switch
  • Good precision
  • Great design

  • Legs can’t collapse
  • Hefty price tag
  • Uneven work surface

This contractor saw system features a steel body and wings with 30 inch aluminum guard. In terms of blade it carries a riving knife blade and 10inch blade. Also included in the design are a miter gauge, micro blade guard and stand brake cartridge.

The SawStop system boasts advanced safety features which it claims are unique to this particular product.
Cleverly the saw itself can detect when a person comes into contact with the blade and stop instantly, drastically reducing the risk and severity of potential injury. It works by a small electric current passing across the blade and a system which monitors the current for changes.

When skin comes into contact with the blade a heavy-duty spring pushes a block of aluminum into the teeth to stop it from spinning. The saw is also covered to reduce the amount of dust spread around your workshop and the number of particles in the air, helpful for air quality.

The blade itself is 10inches with 40 teeth. Weighing it at 341 pounds it is not as heavy as some on the market though this is not reflected in the price. The work area is significant which means whatever project you’re working on, you should find yourself with plenty of space to spread out.

Want to know more about the SawStop CNS ?
Click here to LEARN MORE From Amazon Customers.

Best Hybrid Table Saw Summary

A hybrid table saw is multipurpose since it combines aspects of various other types of saws, such as cabinet and contractor saw models. Due to their versatility, they are very common among woodworkers who need a machine that can cut different types of wood with ease.

When choosing the best hybrid table saw for use, always ensure that it has the appropriate features needed to do the job set out for it. For instance, the tool should have a flat deviation suitable for making accurate cuts, with a deviation angle of around 0.005’’. Additionally, your device should have a bevel capacity that’s suitable for making accurately angled cuts in all directions, you should be able to rotate the blade left or right with ease to complete the different cutting tasks you have.

Typically, the decision of which machine to buy will depend on the nature of your job. Always go for a lightweight and portable hybrid table saw that you can control with ease about the workshop. Likewise, check that the device has a suitable voltage capacity for handling heavy-duty tasks, or to be used for long periods of time.

3.4